Klotz C6AUFEH – CAT6A data cable
2.00 € (inc tax)
- 4 x 2 x 0.57 mm (AWG 23/1) – 100 Ohm
- U/FTP (foil shielded twisted pairs)
- Category 6 augmented – according to DIN IEC 61156-5
- Halogen free and flame retardant and non-corrosive
- analog and digital audio signals
- digital media over IP
- BauPVOclass Dca – s2, d2, a1 according to EN50575
- CPRclass Dca – s2, d2, a1 acc. to EN50575 (IEC 60332)
In stock (can be backordered)
Klotz C6AUFEH-D.100 data cable
This data cable is used for the transmission of analog and digital signals in the frequency range up to 500 MHz. It is specially designed for cabling in primary (campus), secondary (riser) and tertiary (horizontal) areas.
It is suitable for IEEE 802.3 10/100/1000/10GBase-T, FDDI, broadband, video, ISDN, ATM, PoE.
Technical data
Structure
- Conductor: Bare copper solid conductor, Ø 0.57 mm (AWG 23/1)
- Core insulation: Foam-Skin PE
- Pair stranding: 2 cores to pair
- Stranding: 4 pairs to the core
- Pair shield: AL/PET foil
- Outer diameter: 7.3 mm
Electrical
- Conductor resistance: < 75 Ω/km
- Insulation resistance: > 5 GΩ x km
- Operating capacitance: 45 nF/km
- Characteristic impedance: 100 Ω ± 15%
- Signal velocity: 0.78 c
Properties
- Min. bending radius: laying: 8x outer diameter, operation: 4x outer diameter
- Temperature range: laying: -20°C / +60°C, operation: ±0°C / +50°C
- Flame retardance: According to IEC 60332-1-2 and IEC 60332-3-24
- Halogen-free: According to IEC 60754-1/2
- Smoke density: According to IEC 61034-2
| Weight | 0.05 kg |
|---|---|
| Dimensions | 10 × 0.5 × 0.5 cm |
| Lenght | 2m, 3m, 5m, 10m |
| Connector 1 | XLR M, XLR F, BANANA |
| Connector 2 | XLR M, XLR F, BANANA |
Related products
-15%
Original price was: 14.68 €.12.44 €Current price is: 12.44 €. (inc tax)
10.70 € (inc tax)
44.90 € (inc tax)
-11%
Original price was: 34.67 €.30.69 €Current price is: 30.69 €. (inc tax)
18.10 € (inc tax)